Blog
Hospital Inventory and Procurement: Consumables, Equipment, Suppliers
How Indonesian hospitals can control consumables, equipment and suppliers: what to track, what to buy, where it goes wrong, and when software helps.
- mid
- hospital
A hospital does not run on one inventory. It runs on at least three: consumables that are used every hour, equipment that lasts for years, and the supplier relationships that keep both flowing. Most hospitals manage them with a mix of spreadsheets, paper requisitions and the memory of one experienced storekeeper.
The short answer: control comes from a few unglamorous basics. Know what you hold and where it is. Know what is about to expire or break. Make every purchase traceable from request to payment. Software helps with all of this, but only after the process is clear enough to describe on one page.
Three different problems
Treat these separately, because they fail in different ways.
| Area | Typical items | Main risk |
|---|---|---|
| Consumables | Syringes, gloves, dressings, IV fluids, reagents | Stockouts, expiry, overstock tying up cash |
| Equipment | Monitors, ventilators, imaging, sterilisers | Unknown location, missed maintenance, unplanned downtime |
| Suppliers | Distributors, manufacturers, service vendors | Price drift, late delivery, weak paper trail |
Pharmacy stock is a fourth category with its own rules and licensing, and many hospitals run it separately. Much of the thinking below applies to it as well, but check the specifics with your pharmacy head.
Consumables: stop guessing the reorder point
The common failure is reordering by feel. The storeroom looks low, someone raises a request, and the supplier delivers a week later. Meanwhile the ward has borrowed stock from another ward, so nobody knows the real consumption.
A workable approach has four parts:
- Stock by location, not only by warehouse. Central store, ward sub-stores, operating theatre and emergency room each hold their own stock. If you only track the central store, usage by ward is invisible.
- Reorder levels per item. Set a minimum and a target quantity based on actual usage and supplier lead time. Revisit them quarterly.
- Batch and expiry tracking for anything that expires, with the earliest-expiring batch issued first (often called FEFO).
- Classify items to focus attention. A common technique is ABC-VED analysis, which ranks items by spend (ABC) and by how critical they are (vital, essential, desirable). A 2024 study at the central pharmacy of an Indian rural tertiary hospital used it to segment stock and recommend buffer levels by class. In that study, about 12% of items accounted for roughly 70% of average daily expenditure (PMC). Your numbers will differ, but the principle holds: do not manage a box of tape with the same care as a critical implant.
Do the classification first, even in a spreadsheet. It tells you where tight control pays off and where a simple two-bin system is enough.
Equipment: an asset register before anything else
You cannot maintain what you cannot find. WHO’s 2011 technical guidance on medical equipment inventory management is one of a three-part series on establishing or improving a medical equipment maintenance programme, alongside guidance on maintenance and on computerized maintenance management systems (WHO). WHO also published a 2025 document on inventory and maintenance management information systems for medical devices (WHO).
For each asset, a useful register records:
- Identity: type, make, model, serial number, supplier, purchase date and cost
- Location and responsible department
- Warranty and service contract terms
- Maintenance schedule and history
- Replacement or disposal planning date
The register earns its keep the first time a director asks “how many infusion pumps are older than eight years, and what is the service contract cost?” and the answer takes minutes instead of days.
Procurement: make the paper trail boring
Procurement problems in hospitals are rarely exotic. They are usually one of these:
- Requests approved verbally and never recorded
- Several departments buying the same item from different suppliers at different prices
- Goods received without checking against the purchase order
- Invoices paid without matching delivery and order (a “three-way match”)
- Emergency purchases that become the normal way of buying
A clean flow looks like this: department request, approval by budget holder, purchase order to an approved supplier, goods receipt checked against the order, invoice matched, then payment. Each step has an owner and leaves a record. For larger items such as equipment, add a comparison of quotations and a sign-off level that rises with the amount in rupiah.
None of this is clever. Its value is that when something goes wrong, you can find out who ordered what, when, at what price.
Supplier control
Treat suppliers as a managed list rather than a phone book. Track delivery punctuality, short deliveries, returns, price history and expiry dating on delivered stock (short-dated delivery is a real issue). Review the main suppliers regularly with real numbers, and keep a second source for critical items where the market allows it.
If you buy through consolidated or group-wide contracts, make sure each hospital in the group can see the agreed price at the point of ordering. Otherwise the contract exists on paper only.
What it costs and what the trade-offs are
We will not quote a price here, because costs vary widely with hospital size, number of locations and how much is custom. What you can reasonably expect to budget for:
- Software licence or development
- Setup, item master data cleaning and opening stock count
- Barcode printers and scanners if you use them
- Training for storekeepers, ward staff and purchasing
- Ongoing support
The trade-offs are real. Barcoding at ward level improves accuracy but adds work for busy nurses. Tight reorder levels free cash but raise stockout risk. Central purchasing saves money but can slow urgent orders. Decide which risk you can live with, per item class.
Where it goes wrong
- Dirty item master. The same glove listed under five names makes every report useless. Clean it before go-live.
- No opening count. Starting a system on guessed quantities means distrust from day one.
- Ward stock ignored. The central store looks accurate while the real consumption happens elsewhere.
- Software before process. Automating a confused approval chain gives you a faster confused approval chain.
- No owner. Someone senior has to be accountable for stock accuracy, or it decays within months.
Ready-made, Odoo or custom?
Many hospitals do not need a custom inventory build. General ERP software handles inventory and purchasing well. Odoo, for example, supports lot tracking, expiration dates, a FEFO removal strategy and expiry alerts in its inventory module (Odoo documentation), alongside purchasing and accounting.
The usual question is how this connects to the clinical side. Issuing stock to a patient, a ward or a procedure is where inventory meets the hospital system. If you already run a hospital management system, check whether it can pass usage data to the inventory and purchasing tool, or whether it has its own store module. Custom work makes sense when your approval rules, multi-site structure or ward workflows do not fit standard setups. Otherwise, configuring a standard tool is cheaper and easier to maintain.
When to get help
Consider outside help if any of these are true: you cannot say what stock you hold without a physical count, expiry write-offs are a recurring surprise, equipment downtime is discovered rather than planned, or purchases cannot be traced to approvals. A short review of the current process, before choosing any software, usually saves money.
Talk to us
Teknologia Solutions builds custom software and implements Odoo, and we also offer our own clinic management system and hospital management system, which can integrate with Odoo. If you want to think through your inventory and procurement setup, we are happy to have a no-charge conversation, with no obligation to buy anything.
Sources: WHO, Introduction to medical equipment inventory management (2011); WHO, Inventory and maintenance management information system for medical devices (2025); Cureus (via PMC), Buffer Stock Inventory Control Mechanism: An Approach of Minimizing the Buffer Stock Level Through Segmentation at a Tertiary Care Rural Hospital (2024); Odoo 18 documentation, Expiration dates. Please verify details against the primary sources and your own regulatory requirements before acting.